Accessories (overview) – Lenze 9400 Manual User Manual
Page 465
Accessories (overview)
Motor holding brake control modules
Motor holding brake control module E94AZHY0026
9
465
EDS94SPP101 EN 7.1
Installation steps
E94AZHY003
1. Plug the motor brake control module onto the terminals of the standard device.
– Ensure that both clips snap into the slots of the standard device!
2. Check that the motor brake control module is securely connected.
Terminal data
Terminal X107
Labelling
Description
Connection of the motor holding brake:
BD1
BD2
+ (Lenze: WH)
- (Lenze: BN)
E94AZHY0026: 180 V DC, max. 0.61 A
Ensure correct polarity!
SSP94A6107
L1
L2/N
Supply voltage of the motor holding brake
Terminal data
Conductor cross-section
Tightening torque
[mm
2
]
[AWG]
[Nm]
[lb-in]
Flexible
0.5 ... 2.5
20 ... 12
Spring terminal
With wire end
ferrule
Stripping length or contact length: 8 mm