Lenze 9400 Manual - Manual (Page 361)

Accessories (overview)
Communication modules
Ethernet interface
9

361 EDS94SPP101 EN 7.1
Screw terminal data
Area Values
Electrical connection Plug connector with screw connection
Possible connections rigid:
1.5 mm 2 (AWG 16)
flexible:
without wire end ferrule
1.5 mm 2 (AWG 16)
with wire end ferrule, without plastic sleeve
1.5 mm 2 (AWG 16)
with wire end ferrule, with plastic sleeve
1.5 mm 2 (AWG 16)
Tightening torque 0.5 ... 0.6 Nm (4.4 ... 5.3 lb-in)
Stripping length 6 mm
Ethernet connection
RJ45 socket PIN Signal
1 Tx +
2 Tx -
3 Rx +
4 -
5 -
6 Rx -
7 -
E94AYCXX004C 8 -

Note!
Plug/remove the Ethernet cable plug vertically into/from the socket to make
sure that the RJ45 socket will not be damaged.