GE Industrial Solutions DV-300 DC Drive Users Manual - Manual (Page 140)

GEI-100332Ga
——— FUNCTION DESCRIPTION ———
6
12
6.3 MONITOR
MONITOR
[314] Enable drive
[315] Start/Stop
Measurements
Speed
Speed in DRC
[109] Ramp ref (d) [FF]
[112] Ramp output (d) [FF]
[115] Speed ref (d) [FF]
[119] Actual spd (d) [FF]
[925] F act spd (d) [FF]
[923] Act spd filter [s]
Speed in rpm
[110] Ramp ref (rpm)
[113] Ramp outp (rpm)
[118] Speed ref (rpm)
[122] Actual spd (rpm)
[427] Enc 1 speed (rpm)
[420] Enc 2 speed (rpm)
[924] F act spd (rpm)
[923] Act spd filter [s]
Speed in %
[111] Ramp ref (%)
[114] Ramp output (%)
[117] Speed ref (%)
[121] Actual spd (%)
[466] Mains voltage [V]
[588] Mains frequency [Hz]
[1052] Output power [Kw]
[233] Output voltage [V]
[199] Motor current [%]
[928] F T curr (%)
[926] T curr filter [s]
[41] T current ref [%]
[500] Flux reference [%]
[234] Flux current %
[351] Flux current (A)
I/O
Digital I/Q
[582] Virtual dig inp
[583] Virtual dig out
The MONITOR menu shows all current reference and actual values and also the situation of the digital inputs/
outputs. The values related to the speed are given in rpm (revolutions per minute), as a percentage (related to
the Speed base value) and in the dimension specified by the factor function.