GE Industrial Solutions DV-300 DC Drive Users Manual - Manual (Page 348)

GEI-100332Ga
——— FUNCTION DESCRIPTION ———
6
220
Parameter description No.
Value
Standard
Configuration min max
Factory
American
Factory
European
Face value num 54 1 32767 1 1
Face value den 53 1 32767 1 1
Dim factor num 50 1 65535 1 1
Dim factor den 51 1 231-1 1 1
Dim factor text 52 rpm rpm
Dim factor num Numerator of the dimension factor
Dim factor den Denomiator of the dimension factor
Dim factor text Unit of the dimension factor. This text is shown in the display of the keypad when the
reference value is shown.
Possible characters: / % & + , - . 0..9 : < = > ? A...Z [ ] a...z
Face value num
Numerator of the reference value factor.
Face value den Denominator of the reference value factor.
See example in section 6.11.6, “Dimension factor, Face value factor”, on how to make the calculation.
6.19 SERVICE
The SERVICE menu is only accessible for the service personnel of the manufacturer.