GE Industrial Solutions DV-300 DC Drive Users Manual - Manual (Page 310)

GEI-100332Ga
——— FUNCTION DESCRIPTION ———
6
182
6.17.2.1 Compensations and closing of the tension loop
OPTIONS
Torque winder
Torque calculat
Comp calculat
[1183] Int acc calc En
[1182] Time acc/dec min [s]
[1212] Acc/dec filter [ms]
[1184] Line acc [%]
[1185] Line dec [%]
[1186] Line fast stop [%]
[1188] Line acc status
[1189] Line dec status
[1190] Line fstp status
[1171] Variable J comp [%]
[1172] Constant J comp [%]
[1192] Act var J comp [%]
[1191] Act const J comp [%]
[1173] Mat width [%]
[1174] Static f [%]
[1175] Dinamic f [%]
[1287] Static f Zero
[1213] Actual comp [%]
[1214] Closed loop En
[1208] Close loop comp
Parameter description No.
Value
Standard
Configuration min max
Factory
American
Factory
European
Int acc calc En
Enabled (1) / Disabled (0)
1183 0 1 Enabled (1) Enabled (1) *
Time acc/dec min [s] 1182 0.15 300.00 9.01 9.01
Acc/dec filter [ms] 1212 0 5000 30 30
Line acc [%] 1184 0.00 100.00 100 100
Line dec [%] 1185 0.00 100.00 100 100
Line fast stop [%] 1186 0.00 100.00 100 100
Line acc status 1188 0 1 OFF OFF *
Line dec status 1189 0 1 OFF OFF *
Line fstp status 1190 0 1 OFF OFF *
Variable J comp [%] 1171 0.00 199.99 0 0
Constant J comp [%] 1172 -100.00 +100.00 0 0
Act var J comp [%] 1192 - 200.00 0 0
Act const J comp [%] 1191 - 200.00 0 0
Mat width [%] 1173 0.00 100.00 100 100
Static f [%] 1174 0.00 199.99 0 0
Dinamic f [%] 1175 0.00 199.99 0 0
Static f Zero
Enabled (1) / Disabled (0)
1287 0 1 Disabled (0) Disabled (0)
Actual comp [%] 1213 -200 +200 **
Closed loop En
Enabled (1) / Disabled (0)
1214 0 1 Disabled (0) Disabled (0)
Close loop comp 1208 -32767 +32767
* This parameter can be set on a programmable digital input.
** This parameter can be set on a programmable digital output.