GE Industrial Solutions DV-300 DC Drive Users Manual - Manual (Page 277)

DV-300 Adjustable Speed Drives
——— FUNCTION DESCRIPTION ———
6
149
6.16.3.7 Output reference
Figure 6.16.3.5: Output reference block description
PD control
[772] PID out sign PID
[774] PID output
Parameter description No.
Value
Standard
Configuration min max
Factory
American
Factory
European
PID out sign PID
Positive (0)
Bipolar (1)
772 0 1 1 1
PID output 774 -10000 +10000 0 0 *
* This parameter can be set on an analogue programmable output.
PID out. sign PID Through this parameter it is possible to set the output of the regulator to be either bipolar
or simply positive (clamp of negative side).
PID output Display of regulator output. It is possible to program this parameter to an analog output,
in order to perform a reference cascade in multidrive systems.