GE Industrial Solutions DV-300 DC Drive Users Manual - Manual (Page 49)

DV-300 Adjustable Speed Drives
——— WIRING PROCEDURES ———
4
5
Table 4.3.5: Cable size for power field terminals U1, V1, C1, D1
American European max cable section
[mm2]
AWG Tightening torque
[Nm]
6KDV3017... 6KDV3020...
0.2...4 24...10 0.5...0.8
6KDV3035... 6KDV3040...
6KDV3056... 6KDV3070...
6KDV3088... 6KDV3110...
6KDV3112... 6KDV3140...
6KDV3148... 6KDV3185...
6KDV3224... 6KDV3280...
6KDV3280... 6KDV3350...
6KDV3336... 6KDV3420...
6KDV3400... 6KDV3500...
6KDV3450... 6KDV3650...
6KDV3560... 6KDV3770...
6KDV3800... 6KDV310H
6KDV3850
GD0130g
The following sizes are provided with terminal blocks:
U/V/W/C/D: AWG 5 - 3/0 (16-95 mm 2 ), stranded Cu
PE: AWG 5 - 1 (16-50 mm 2 ), stranded Cu
The following AWG and torque are required for field wiring:
Device AWG Tightening torque [Nm]
6KDV3088… 2 12
6KDV3112… 1/0 12
6KDV3148… 3/0 12
earth - 12
GD0136g-a
n
ote
! When connecting the converter, a 9.5 mm (3/8 in.) spacing between uninsulated live parts of
opposite polarity should be mantained.
n
ote
! The DV-300 converters are UL listed only when used with the above mentioned terminal kits.
Table 4.3.6: Cable size for fans, signals, thermistors and regulation supply
Terminals Max connection cable section Tightening torque
[Nm] flexible [mm 2 ] multi-core [mm 2 ] AWG
PE 2.5...10 2.5...10 12...8 2
U2, U3, V2, V3, 35, 36, 75, 76, 78, 79 0.14...1.5 0.14...2.5 26...14 0.5
T0140g