GE Industrial Solutions DV-300 DC Drive Users Manual - Manual (Page 258)

GEI-100332Ga
——— FUNCTION DESCRIPTION ———
6
130
6.15.4. Signal adaptation
SPEC FUNCTIONS
Links
Link 1
[484] Source
[485] Destination
[486] Mul gain
[487] Div gain
[488] Input max
[489] Input min
[490] Input offset
[491] Output offset
[492] Inp absolute
Link 2 ... 6
[553] [1218] [1227] [1236] [1245] Source
[554] [1219] [1228] [1237] [1246] Destination
[555] [1220] [1229] [1238] [1247] Mul gain
[556] [1221] [1230] [1239] [1248] Div gain
[557] [1222] [1231] [1240] [1249] Input max
[558] [1223] [1232] [1241] [1250] Input min
[559] [1224] [1233] [1242] [1251] Input offset
[560] [1225] [1234] [1243] [1252] Output offset
[561] [1226] [1235] [1244] [1253] Inp absolute
Parameter description
Link 1
No.
Link 2
No.
Link 3
No.
Link 4
No.
Link 5
No.
Link 6
No.
Value
Standard
Configuration min max
Factory
American
Factory
European
Source 484 553 1218 1227 1236 1245 0 65535 0 0 -
Destination 485 554 1219 1228 1237 1246 0 65535 0 0 -
Mul gain 486 555 1220 1229 1238 1247 -10000 +10000 1 1 -
Div gain 487 556 1221 1230 1239 1248 -10000 +10000 1 1 -
Input max 488 557 1222 1231 1240 1249 -231 231-1 0 0 -
Input min 489 558 1223 1232 1241 1250 -231 231-1 0 0 -
Input offset 490 559 1224 1233 1242 1251 -231 231-1 0 0 -
Output offset 491 560 1225 1234 1243 1252 -231 231-1 0 0 -
Inp absolute
OFF / ON
492 561 1226 1235 1244 1253 0 1 OFF OFF -
The Link1 and Link 6 functions are two control section operating independently of each other for the signal
adaptation. With the Links, parameters can be: rectified, limited, multiplied by a factor, divided by a factor
and provided with an offset.
Source Parameter number used as an input quantity. For example “8236” for the Ramp ref 1
parameter (44+8192 offset). Select the parameter number in the individual descriptions
or in the list of all parameters in section 10, “Parameter list”.
Destination Parameter number, which determines the output quantity. Select the parameter number
(+8192 offset) in the individual description column or in the list of all parameters in
section 10, “Parameter lists”.
Mul gain Multiplicative factor of the input quantity (after a possible limitation). Resolution: 5 digits.
Div gain Divisor, through which it is possible to divide the input quantity already multiplied and
limited. Resolution: 5 digits.
Input max Max. limit of the input quantity. Resolution: 5 digits.
Input min Min. limit of the input quantity. Resolution: 5 digits.
Input offset Offset to be added to the input quantity. Resolution: 5 digits.
Output offset Offset to be added to the output quantity. Resolution: 5 digits.