Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 102
Brocade Mobility RFS Controller CLI Reference Guide
85
53-1003098-01
3
NOTE
Refer to the interface details below when using
clear
- ge <index> – Brocade Mobility RFS4000 supports 5 GEs, Brocade Mobility RFS6000 supports 8
GEs, Brocade Mobility RFS7000 supports 4 GEs
- me1 – Available in both Brocade Mobility RFS7000 and Brocade Mobility RFS6000
- up1– Uplink interface on Brocade Mobility RFS4000
Syntax:
clear
[arp-cache|cdp|counters|crypto|event-history|firewall|gre|ip|l2tpv3-stats|
license|lldp|logging|mac-address-table|mint|role|rtls|smart-cache|spanning-tr
ee|
vrrp]
clear arp-cache {on <DEVICE-NAME>}
clear [cdp|lldp] neighbors {on <DEVICE-NAME>}
clear counters [all|br|bridge|interface|radio|router|thread|wireless-client]
clear counters [all|bridge|router|thread]
clear counters [br|wireless-client] {<MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
clear counters interface [<INTERFACE-NAME>|all|ge <1-5>|me1|port-channel
<1-3>|pppoe1|
vlan <1-4094>|wwan1]
clear counters radio {<MAC/HOSTNAME>|on}
clear counters radio {<MAC/HOSTNAME> <1-3>} {(on <DEVICE-OR-DOMAIN-NAME>)}
clear crypto [ike|ipsec]
clear crypto ike sa [<IP>|all] {on <DEVICE-NAME>}
clear crypto ipsec sa {on <DEVICE-NAME>}
clear event-history
clear firewall [dhcp snoop-table|dos stats|flows] {on <DEVICE-NAME>}
clear gre stats {on <DEVICE-NAME>}
clear ip [dhcp|ospf]
clear ip dhcp bindings [<IP>|all] {on <DEVICE-NAME>}
clear ip ospf process {on <DEVICE-NAME>}
clear l2tpv3-stats tunnel <L2TPV3-TUNNEL-NAME> {on <DEVICE-NAME>|session
<SESSION-
NAME> {on <DEVICE-NAME>}}
clear license [borrowed|lent]
clear license borrowed {on <DEVICE-NAME>}
clear license lent to <DEVICE-NAME> {on <DEVICE-NAME>}
clear logging {on <DEVICE-NAME>}
clear mac-address-table {address|interface|vlan} {on <DEVICE-NAME>}
clear mac-address-table {address <MAC>|vlan <1-4094>} {on <DEVICE-NAME>}
clear mac-address-table interface [<IF-NAME>|ge <1-X>|port-channel <1-X>|
t1e1 <1-4> <1-1>|up <1-X>|vmif <1-X>|xge <1-4>] {on <DEVICE-NAME>}