Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 813)

800 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
service
[critical-resource|fast-switching|enable|global-association-list|meshpoint|
pm|power-config|radius|rss-timeout|watchdog|wireless|show]
service critical-resource port-mode-source-ip <IP>
service enable [l2tpv3|pppoe|adiusd]
service global-association-list blacklist-interval <1-65535>
service meshpoint loop-prevention-port [<L2-INTERFACE-NAME>|ge <1-5>|
port-channel <1-2>|up1]
service pm sys-restart
service power-config [3af-out|force-3at]
service radius dynamic-authorization additional-port <1-65535>
service rss-timeout <0-86400>
service watchdog
service wireless [br650|client|cred-cache-sync|test|wispe-controller-port]
service wireless br650 legacy-auto-update-image <FILE>
service wirless client tx-deauth on-radar-detect
service wireless cred-cache-sync [full|interval <30-864000>|never|partial]
service wireless test [max-rate|max-retries|min-rate]
service wireless test [max-rate|min-rate]
[1,2,5.5,6,11,12,18,24,36,48,54,mcs0,
mcs1,............mcs23]
service wireless test max-retries <0-15>
service wireless wispe-controller-port <1-65535>
service show cli
Parameters
service critical-resource port-mode-source-ip <IP>
critical-resource
port-mode-source-ip <IP> Hard codes a source IP for critical resource management