Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 160)

Brocade Mobility RFS Controller CLI Reference Guide 143
53-1003098-01
3
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
upgrade-abort {on <DEVICE-OR-DOMAIN-NAME>}
Parameters
upgrade-abort {on <DEVICE-OR-DOMAIN-NAME>}
Example
rfs7000-37FABE#upgrade-abort on rfs7000-37FABE
Error: No upgrade in progress
rfs7000-37FABE#
watch
Privileged Exec Mode Commands
Repeats a specified CLI command at periodic intervals
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
watch <1-3600> <LINE>
Parameters
watch <1-3600> <LINE>
Example
rfs7000-37FABE#watch 1 show clock
rfs7000-37FABE#
upgrade-abort Aborts an ongoing software image upgrade
on
<DEVICE-OR-DOMAIN-NAME
> Optional. Aborts an ongoing software image upgrade on a specified device or domain
•
<DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or
RF Domain.
watch <1-3600> Repeats a CLI command at a specified interval
<1-3600> Select an interval from 1- 3600 seconds. Pressing CTRL-Z halts execution of the command
<LINE> Specify the CLI command name.