Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 534)

520 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
show wireless client {association-history <MAC>} {on <DEVICE-OR-DOMAIN-NAME>}
show wireless client {detail <MAC>} {(on <DEVICE-OR-DOMAIN-NAME>)}
show wireless client {filter ip [<IP>|not <IP>]} {on <DEVICE-OR-DOMAIN-NAME>}
show wireless client {filter} {state [data-ready|not
[data-ready|roaming]|roaming]}
{on <DEVICE-OR-DOMAIN-NAME>}
load-balancing
{client-capability|
events|neighbors} Optional. Displays load balancing status. Use additional filters to view specific details.
•
client-capability – Optional. Displays client band capability
•
events – Optional. Displays client events
•
neighbors – Optional. Displays neighboring clients
on <DEVICE-NAME> The following keyword is recursive and common to the ‘client-capability’, ‘events’, and ‘neighbors’ parameters:
•
on <DEVICE-NAME> – Optional. Displays load balancing information, based on the parameters passed,
on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
wireless Displays wireless configuration parameters
client Displays client information based on the parameters passed
association-history
<MAC> Optional. Displays association history for a specified client
•
<MAC> – Specify the MAC address of the client.
on
<DEVICE-OR-DOMAIN-NA
ME> Optional. Displays association history on a specified device or RF Domain
•
<DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF
Domain.
wireless Displays wireless configuration parameters
client Displays client information based on the parameters passed
detail <MAC> Optional. Displays detailed wireless client(s) information
•
<MAC> – Optional. Displays detailed information for a specified wireless client. Specify the MAC address
of the client.
on
<DEVICE-OR-DOMAIN-NA
ME> The following keyword is recursive and common to the ‘detail <MAC>’ parameter:
•
on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays detailed information on a specified device or RF
Domain
•
<DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF
Domain.
wireless Displays wireless configuration parameters
client Displays client information based on the parameters passed
filter IP
[<IP>|not <IP>] Optional. Uses IP addresses to filter wireless clients
•
<IP> – Selects clients with IP address matching the <IP> parameter
•
not <IP> – Inverts the match selection
on
<DEVICE-OR-DOMAIN-NA
ME> The following keyword is common to the ‘IP’ and ‘not IP’ parameters:
•
on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays selected wireless client information on a specified
device or RF Domain
•
<DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF
Domain.
wireless Displays wireless configuration parameters
client Displays client information based on the parameters passed