Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 152)

Brocade Mobility RFS Controller CLI Reference Guide 135
53-1003098-01
3
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
reload {cancel|force|in|on}
reload {on <DEVICE-OR-DOMAIN-NAME>}
reload {cancel|force} {on <DEVICE-OR-DOMAIN-NAME>}
reload {in <1-999>} {list|on}
reload {in <1-999>} {list {<LINE>|all}|on <DEVICE-OR-DOMAIN-NAME>}
reload {in <1-999>} {on <DEVICE-OR-DOMAIN-NAME>}
Parameters
reload {on <DEVICE-OR-DOMAIN-NAME>}
reload {cancel|force} {on <DEVICE-OR-DOMAIN-NAME>}
reload {in <1-999>} {list {<LINE>|all}|on <DEVICE-OR-DOMAIN-NAME>}
Example
rfs7000-37FABE#reload force on rfs7000-37FABE
rfs7000-37FABE#
rename
Privileged Exec Mode Commands
Renames a file in the devices’ file system
Supported in the following platforms:
on
<DEVICE-OR-DOMIN-NAME> Optional. Performs reload on a specified device or RF Domain. Halts the system and performs a warm
reboot
•
<DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or
RF Domain.
cancel Optional. Cancels pending reloads
force Optional. Forces reboot, while ignoring conditions like upgrade in progress, unsaved changes etc.
on
<DEVICE-OR-DOMAIN-NAME> Optional. Cancels or forces a reload on a specified device or RF Domain
•
<DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or
RF Domain.
in <1-999> Optional. Performs a reload after a specified time period
•
<1-999> – Specify the time from 1 - 999 minutes.
list {<LINE>|all} Optional. Reloads all adopted devices or specified devices
•
<LINE> – Optional. Reloads listed devices. List all devices (to be reloaded) separated by a space
•
all – Optional. Reloads all devices adopted by this controller
on
<DEVICE-OR-DOMAIN-NAME> Optional. Reloads on a specified device or RF Domain
•
<DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or
RF Domain.