Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 40)

22 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
2
clear crypto ike sa [<IP>|all] {on <DEVICE-NAME>}
clear crypto ipsec sa {on <DEVICE-NAME>}
clear gre stats {on <DEVICE-NAME>}
clear event-history
clear ip dhcp bindings [<IP>|all] {on <DEVICE-NAME>}
clear ip ospf process {on <DEVICE-NAME>}
clear mac-address-table {address <MAC>|vlan <1-4094>} {on <DEVICE-NAME>}
crypto Clears encryption module database
ike sa [<IP>|all] Clears Internet Key Exchange (IKE) security associations (SAs)
•
<IP> – Clears IKE SA entries for the peer identified by the <IP> keyword
•
all – Clears IKE SA entries for all peers
on <DEVICE-NAME> Optional. Clears IKE SA entries, for a specified peer or all peers, on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
crypto Clears encryption module database
ipsec sa
{on <DEVICE-NAME>} Clears Internet Protocol Security (IPSec) database SAs
•
on <DEVICE-NAME> – Optional. Clears IPSec SA entries on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
gre stats Clears GRE tunnel statistics
on <DEVICE-NAME> Optional. GRE tunnel statistics on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
event-history Clears event history cache entries
ip Clears a Dynamic Host Configuration Protocol (DHCP) server’s IP address binding entries
dhcp bindings Clears DHCP connections and server bindings
<IP> Clears specific address binding entries. Specify the IP address to clear binding entries.
all Clears all address binding entries
on <DEVICE-NAME> Optional. Clears a specified address binding or all address bindings on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
ip ospf process Clears already enabled Open Shortest Path First (OSPF) process and restarts the process
on <DEVICE-NAME> Optional. Clears OSPF process on a specified device
OSPF is a link-state interior gateway protocol (IGP). OSPF routes IP packets within a single routing domain
(autonomous system), like an enterprise LAN. OSPF gathers link state information from neighboring
routers and constructs a network topology. The topology determines the routing table presented to the
Internet Layer, which makes routing decisions based solely on the destination IP address found in IP
packets.
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
mac-address-table Clears the MAC address forwarding table
address <MAC> Optional. Clears a specified MAC address from the MAC address table.
•
<MAC> – Specify the MAC address in one of the following formats: AA-BB-CC-DD-EE-FF or
AA:BB:CC;DD:EE:FF or AABB.CCDD.EEFF