Airtime-fairness – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual

Page 703

Advertising
background image

690

Brocade Mobility RFS Controller CLI Reference Guide

53-1003098-01

7

aggregation amsdu [rx-only|tx-rx]

Example

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#aggregation ampdu

tx-only

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context

interface radio1

aggregation ampdu tx-only

aeroscout forward

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#

Related Commands:

airtime-fairness

interface-config-radio-instance

Enables equal access for wireless clients based on their airtime usage

Supported in the following platforms:

Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point

Syntax:

airtime-fairness {prefer-ht} {weight <1-10>}

Parameters

airtime-fairness {prefer-ht} {weight <1-10>}

Example

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#airtime-fairness

prefer-ht weight 6

rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context

interface radio1

aggregation ampdu tx-only

aeroscout forward

airtime-fairness prefer-ht weight 6

aggregation

Configures 802.11n frame aggregation parameters

amsdu

Configures Aggregated MAC Service Data Unit (AMSDU) frame aggregation parameters. AMSDU
aggregation collects Ethernet frames addressed to a single destination. But, unlike AMPDU, it wraps all
frames in a single 802.11n frame.

rx-only

Supports the receipt of AMSDU aggregated frames only (default setting)

tx-rx

Supports the transmission and receipt of AMSDU aggregated frames

no

Disables 802.11n aggregation parameters

airtime-fairness

Enables equal access for wireless clients based on their airtime usage

prefer-ht

Optional. Gives preference to high throughput (802.11n) clients over legacy clients

weight <1-10>

Optional. Configures the relative weightage for 11n clients over legacy clients.

<1-10> – Sets a weightage ratio for 11n clients from 1 - 10

Advertising