Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 771)

758 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
lldp [holdtime|med-tlv-select|run|timer]
lldp [holdtime <10-1800>|run|timer <5-900>]
lldp med-tlv-select [inventory-management|power-management]
Parameters
lldp [holdtime <10-1800>|run|timer <5-900>]
lldp med-tlv-select [inventory-management|power-management]
Example
rfs7000-37FABE(config-profile-default-rfs7000)#lldp timer 20
rfs7000-37FABE(config-profile-default-rfs7000)#show context
profile rfs7000 default-rfs7000
bridge vlan 1
...........................................
use firewall-policy default
ip dns-server-forward
ip nat pool pool1
address range 172.16.10.2 172.16.10.8
ip nat inside source list test interface vlan1 pool pool1 overload
lldp timer 20
--More--
rfs7000-37FABE(config-profile-default-rfs7000)#
Related Commands:
holdtime <10-1800> Sets the holdtime for transmitted LLDP PDUs. This command specifies the time a receiving device holds
information before discarding it.
•
<10-1800> – Specify a holdtime from 10 - 1800 seconds.
run Enables LLDP
timer <5-900> Sets the transmit interval. This command specifies the transmission frequency of LLDP updates in
seconds.
•
<5-900> – Specify transmit interval from 5 - 900 seconds.
med-tlv-select
[inventory-management|
power-management] Provides additional media endpoint device TLVs to enable inventory and power management discovery.
Specifies the LLDP MED TLVs to send or receive.
•
inventory-management – Enables inventory management discovery. Allows an endpoint to convey
detailed inventory information about itself.
•
power-management – Enables extended power via MDI discovery. Allows endpoints to convey power
information, such as how the device is powered, power priority etc.
no Disables LLDP on this profile