Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 421)

406 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
5
service show diag [led-staus|stats] {(on <DEVICE-NAME>)}
service show fib {table-id <0-255>}
service show mint [adopted-devices {on <DEVICE-NAME>}|ports]
service show pm {history} {(on <DEVICE-NAME>)}
on Optional. Displays DHCP lease information for a specified device
pppoe1 Optional. Displays DHCP lease information for a PPP over Ethernet interface
vlan <1-4094> Optional. Displays DHCP lease information for a VLAN interface
•
<1-4094> – Specify a VLAN index from 1 - 4094.
wwan1 Optional. Displays DHCP lease information for a Wireless WAN interface
on <DEVICE-NAME> The following keywords are common to all of the above:
•
on <DEVICE-NAME> – Optional. Displays DHCP lease information for a specified device. If no device is
specified, the system displays information for the logged device.
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
show Displays running system statistics based on the parameters passed
diag Displays diagnostic statistics, such as LED status, fan speed, and sensor temperature
led-status Displays LED state variables and the current state
stats Displays fan speed and sensor temperature statistics
on <DEVICE-NAME> Optional. Displays diagnostic statistics for a specified device. If no device is specified, the system displays
information for the logged device.
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
show Displays running system statistics based on the parameters passed
fib Displays entries in the Forwarding Information Base (FIB)
table-id <0-255> Optional. Displays FIB information maintained by the system based on the table ID
•
<0-255> – Specify the table ID from 0 - 255.
show Displays running system statistics based on the parameters passed
mint Displays MiNT protocol details
adopted-devices
on <DEVICE-NAME> Displays adopted devices status in dpd2
•
on <DEVICE-NAME> – Optional. Displays MiNT protocol details for a specified device. If no device is
specified, the system displays information for the logged device.
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
ports Displays MiNT ports used by various services and features
show Displays running system statistics based on the parameters passed
pm Displays the Process Monitor (PM) controlled process details
history Optional. Displays process change history (the time at which the change was implemented, and the events
that triggered the change)
on <DEVICE-NAME> Optional. Displays process change history for a specified device. If no device is specified, the system
displays information for the logged device.
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.