Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 45)

Brocade Mobility RFS Controller CLI Reference Guide 27
53-1003098-01
2
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
clock set <HH:MM:SS> <1-31> <MONTH> <1993-2035> {on <DEVICE-NAME>}
Parameters
clock set <HH:MM:SS> <1-31> <MONTH> <1993-2035> {on <DEVICE-NAME>}
Example
rfs4000-229D58>clock set 14:25:35 15 Feb 2013
rfs4000-229D58>show clock
2013-02-15 14:25:40 UTC
rfs4000-229D58>
cluster
User Exec Commands
Initiates cluster context. The cluster context provides centralized management to configure all
cluster members from any one member.
Commands executed under this context are executed on all members of the cluster.
Supported in the following platforms:
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
cluster start-election
Parameters
cluster start-election
Example
rfs7000-37FABE>cluster start-election
rfs7000-37FABE>
clock set Sets a device’s software system clock
<HH:MM:SS> Sets the current time (in military format hours, minutes and seconds)
<1-31> Sets the numerical day of the month
<MONTH> Sets the month of the year (Jan to Dec)
<1993-2035> Sets a valid four digit year from 1993 - 2035
on <DEVICE-NAME> Optional. Sets the clock on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
start-election Starts a new cluster master election