Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 805)

792 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
Configures the tunneled WLAN (extended VLAN) wireless controller or service platform’s name
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
tunnel-controller <NAME>
Parameters
tunnel-controller <NAME>
Example
rfs7000-37FABE(config-profile-default-rfs7000)#tunnel-controller testgroup
Related Commands:
use
Profile Config Commands
Associates existing policies with this profile
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax: Profiles Mode
use [advanced-wips-policy|auto-provisioning-policy|captive-portal|
client-identity-group|dhcp-server-policy|event-system-policy|firewall-policy|
global-assoc-policy|management-policy|radius-server-policy|role-policy|
routing-policy|critical-resource-policy]
Syntax: Device Mode
tunnel-controller <NAME> Configures the tunneled WLAN (extended VLAN) wireless controller or service platform’s name
•
<NAME> – Specify a name.
no Removes the configured the tunneled WLAN (extended VLAN) wireless controller or service platform’s name