Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 469)

Brocade Mobility RFS Controller CLI Reference Guide 455
53-1003098-01
6
Displays dot1x information on interfaces
Dot1x (or 802.1x) is an IEEE standard for network authentication. Devices supporting dot1x allow
the automatic provision and connection to the wireless network without launching a Web browser
at login. When within range of a dot1x network, a device automatically connects and authenticates
without needing to manually login.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
NOTE
Dot.1x supplicant configuration is supported on the following platforms:
- Access Points – Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point, Brocade
Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade Mobility 1240 Access
Point
- Wireless Controllers – Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000
NOTE
Dot.1x authenticator configuration is supported on the following platforms:
- Access Points – Brocade Mobility 6511 Access Point, Brocade Mobility 1220 Access Point, Brocade
Mobility 71XX Access Point, Brocade Mobility 1240 Access Point
- Wireless Controllers – Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000
show dot1x {all|interface|on}
show dot1x {all {on <DEVICE-NAME>}|on <DEVICE-NAME>}
show dot1x {interface [<INTERFACE-NAME>|ge <1-4>|port-channel <1-2>}
{on <DEVICE-NAME>}
Parameters
show dot1x {all {on <DEVICE-NAME>}|on <DEVICE-NAME>}
show dot1x {interface [<INTERFACE-NAME>|ge <1-4>|port-channel <1-2>]} {on
<DEVICE-NAME>}
dot1x all
{on <DEVICE-NAME>} Optional. Displays dot1x information for all interfaces
•
on <DEVICE-NAME> – Optional. Displays dot1x information for all interfaces on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
dot1x
{on <DEVICE-NAME>} Optional. Displays dot1x information for interfaces on a specified device
•
<DEVICE-NAME> – Specify the name of AP, wireless controller, or service platform.
dot1x interface Optional. Displays dot1x information for a specified interface or interface type
<INTERFACE-NAME> Displays dot1x information for the layer 2 (Ethernet port) interface specified by the
<INTERFACE-NAME> parameter
ge <1-4> Displays dot1x for a specified GigabitEthernet interface
•
<1-4> – Select the interface index from 1 - 4.