Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 1301
Brocade Mobility RFS Controller CLI Reference Guide
1293
53-1003098-01
27
acs
[channel-hold-time|channel-switch-delta|channel-width|ocs-duration|ocs-freque
ncy|
path-min|path-threshold|priority-meshpoint|sample-count|snr-delta|signal-thre
shold|
tolerance-period]
acs channel-hold-time [2.4GHz|5GHz] <0-86400>
acs channel-switch-delta [2.4GHz|5GHz] <5-35>
acs channel-width [2.4GHz|5GHz] [20MHz|40MHz|auto]
acs ocs-duration [2.4GHz|5GHz] <20-250>
acs ocs-frequency [2.4GHz|5GHz] <1-60>
acs path-min [2.4GHz|5GHz] <100-20000>
acs path-threshold [2.4GHz|5GHz] <800-65535>
acs priority-meshpoint [2.4GHz|5GHz] <MESHPOINT-NAME>
acs sample-count [2.4GHz|5GHz] <1-10>
acs snr-delta [2.4GHz|5GHz] <1-100>
acs signal-threshold [2.4GHz|5GHz] <-100-0>
acs tolerance-period [2.4GHz|5GHz] <10-600>
Parameters
acs channel-hold-time [2.4GHz|5GHz] <0-86400>
acs channel-switch-delta [2.4GHz|5GHz] <5-35>
acs
Configures ACS settings and overrides on the selected meshpoint-device
channel-hold-time [2.4GHz|5GHz]
<0-86400>
Configures the minimum time, in seconds, before a periodic scan, to assess channel conditions for a
meshpoint root, is triggered.
•
2.4 GHz – Configures the channel hold interval for the 2.4 GHz radio band
•
5.0GHz – Configures the channel hold interval for the 5.0 GHz radio band
The following keyword is common to the ‘2.4 GHz’ and ‘5.0 GHz’ bands:
•
<0-86400> – Specify a value from 0 - 86400 seconds. The default is 1800 seconds.
A value of ‘0’ disables periodic channel assessment.
acs
Configures ACS settings and overrides on the selected meshpoint-device
channel-switch-delta
[2.4GHz|5GHz] <5-35>
Configures the difference in interference between the current and best channel needed to trigger a
channel change. Once the difference in the current channel and the best channel interference
equals the configured value, a channel change is triggered.
•
2.4 GHz – Configures the channel switch delta for the 2.4GHz radio band
•
5.0GHz – Configures the channel switch delta for the 5.0 GHz radio band
The following keyword is common to the ‘2.4 GHz’ and ‘5.0 GHz’ bands:
•
<5-35> – Specify a value from 5 - 35 dBm. The default is 10 dBm.