Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 423)

408 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
5
service show wireless reference dot11
[frame|mcs-rates|reason-codes|status-codes]
service show wireless reference dot11 handshake {wpa-wpa2-enterprise|
wpa-wpa2-personal}
service show wireless stats-client diag {<MAC/HOSTNAME>} {(on
<DEVICE-OR-DOMAIN-NAME)}
service smart-rf clear-config {<MAC>|<DEVICE-NAME>|on <DOMAIN-NAME>}
info This parameter is common to client and meshpoint neighbor parameters. Displays information for a
specified wireless client or neighbor
stats This parameter is common to client and meshpoint neighbor parameters. Displays information for a
specified wireless client or neighbor
<MAC> Displays information for a specified wireless client or neighbor
on
<DEVICE-OR-DOMAIN-NAM
E> This parameter is common to client and meshpoint neighbor parameters. Displays information for a
specified wireless client or neighbor.
show Displays running system statistics based on the parameters passed
wireless Displays WLAN statistics (WLAN AAA policy, configuration parameters, VLAN usage etc.)
reference Displays look up reference information related to standards, protocols etc.
dot11 Displays 802.11 standard related information, such as frame structure, MCS rates etc.
frame Displays 802.11 frame structure
mcs-rates Displays MCS rate information
reason-codes Displays 802.11 reason codes (for deauthentication, disassociation etc.)
status-codes Displays 802.11 status codes (for association response etc.
show Displays running system statistics based on the parameters passed
wireless Displays WLAN statistics (WLAN AAA policy, configuration parameters, VLAN usage etc.)
reference Displays look up reference information related to standards, protocols etc.
dot11 Displays 802.11 standard related information, such as frame structure, MCS rates etc.
handshake Displays a flow diagram of 802.11 handshakes
wpa-wpa2-enterprise Optional. Displays a WPA/WPA2 enterprise handshake (TKIP/CCMP with 802.1x authentication)
wpa-wpa2-personal Optional. Displays a WPA/WPA2 personal handshake (TKIP/CCMP with pre-shared keys)
show Displays running system statistics based on the parameters passed
wireless Displays WLAN statistics (WLAN AAA policy, configuration parameters, VLAN usage etc.)
stats-client Displays managed AP statistics
<MAC/HOSTNAME> Optional. Specify the MAC address or hostname of the AP.
on
<DEVICE-OR-DOMAIN-NAME
> Optional. Displays statistics on a specified AP, or all APs on a specified domain.
•
<DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF
Domain.
smart-rf Enables Smart RF management
clear-config Clears WLAN Smart RF configuration on a specified device or on all devices