Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 547)

Brocade Mobility RFS Controller CLI Reference Guide 533
53-1003098-01
6
Total number of clients displayed: 2
rfs4000-22A24E#
wwan
show commands
Displays wireless WAN status
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
show wwan [configuration|status] {on <DEVICE-OR-DOMAIN-NAME>}
Parameters
show wwan [configuration|status] {on <DEVICE-OR-DOMAIN-NAME>}
Example
rfs4000-229D58(config-device-00-23-68-22-9D-58)#show wwan configuration on
rfs4000-229D58
>>> WWAN Configuration:
+-------------------------------------------
| Access Port Name : isp.cingular
| User Name : testuser
| Cryptomap : map1
+-------------------------------------------
rfs4000-229D58(config-device-00-23-68-22-9D-58)#
rfs4000-229D58(config-device-00-23-68-22-9D-58)#show wwan status on
rfs4000-229D58
>>> WWAN Status:
+-------------------------------------------
| State : ACTIVE
| DNS1 : 209.183.54.151
| DNS2 : 209.183.54.151
+-------------------------------------------
rfs4000-229D58(config-device-00-23-68-22-9D-58)#
rfs7000-37FABE(config)#show wwan configuration on rfs7000-37FABE
>>> WWAN Configuration:
wwan Displays wireless WAN configuration and status details
configuration Displays wireless WAN configuration information
status Displays wireless WAN status information
on
<DEVICE-OR-DOMAIN-NA
ME> The following keyword is common to the ‘configuration’ and ‘status’ parameters:
•
on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays configuration or status details on a specified
device or RF Domain