Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 147)

130 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
3
no upgrade <PATCH-NAME> {on <DEVICE-NAME>}
no terminal [length|width]
no wireless client all {filter [wlan <WLAN-NAME>]}
no wireless client all {on <DEVICE-OR-DOMAIN-NAME>} {filter [wlan
<WLAN-NAME>]}
no wireless client mac <MAC> {on <DEVICE-OR-DOMAIN-NAME>}
no virtual-machine assign-usb-ports {on <DEVICE-NAME>}
trace The following command is common to the ‘ssm’ and ‘wireless’ parameters:
•
trace – Traces SSM or wireless related services
pattern
{<WORD>|
on <DEVICE-NAME>} Configures the pattern to match
•
<WORD> – Optional. Specify the pattern to ignore. Reverses the match pattern specified.
•
on <DEVICE-NAME> – Optional. Matches the specified pattern on specified device.
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
no upgrade
<PATCH-NAME> Removes a patch installed on a specified device
•
<PATCH-NAME> – Specify the name of the patch.
on <DEVICE-NAME> Optional. Removes a patch on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
no terminal [length|width] Resets the width of the terminal window, or the number of lines displayed within the terminal window
•
length – Resets the number of lines displayed on the terminal window to its default
•
width – Resets the width of the terminal window to its default.
no wireless client all Disassociates all wireless clients on a specified device or domain
filter wlan
<WLAN-NAME> Optional. Specifies an additional client selection filter
•
wlan – Filters clients on a specified WLAN
•
<WLAN-NAME> – Specify the WLAN name.
no wireless client all
on
<DEVICE-OR-DOMAIN-NAME> Disassociates all clients on a specified device or domain
•
<DEVICE-OR-DOMAIN-NAME> – Optional. Specify the name of the AP, wireless controller, service
platform, or RF Domain.
filter
[wlan <WLAN-NAME>] Optional. Specifies an additional client selection filter
•
wlan – Filters clients on a specified WLAN
•
<WLAN-NAME> – Specify the WLAN name.
no wireless client
mac <MAC> Disassociates a single wireless client on a specified device or RF Domain
•
mac <MAC> – Specify the wireless client’s MAC address in the AA-BB-CC-DD-EE-FF format
on
<DEVICE-OR-DOMAIN-NAME
> Optional. Specifies the name of the AP, wireless controller, service platform, or RF Domain to which the
specified client is associated
no virtual-machine
assign-usb-ports Reverts ports assigned for virtual-machines back to Mobility
This command is available only on the Brocade Mobility RFS9510 series service platforms.
on <DEVICE-NAME> Reverts virtual-machine assigned ports on a specified device
•
on <DEVICE-NAME> – Optional. Specify the name of the AP, wireless controller, or service platform.