Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 348)

332 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
data-rates 5GHz custom
[12|18|24|36|48|54|6|9|basic-1|basic-11|basic-12|basic-18|
basic-2|basic-24|basic-36|basic-48|basic-5.5|basic-54|basic-6|basic-9|
basic-mcs-1s|mcs-1s|mcs2s|mcs3s]
Parameters
data-rates 2.4GHz [b-only|bg|bgn|default|g-only|gn]
data-rates 5GHz [a-only|an|default]
data-rates [2.4GHz|5GHz] custom
[1|11|12|18|2|24|36|48|5.5|54|6|9|basic-1|basic-11|
basic-12|basic-18|basic-2|basic-24|basic-36|basic-48|basic-5.5|basic-54|basic
-6|
basic-9|basic-mcs-1s|mcs-1s|mcs-2s|mcs-3s]
data-rates Specifies the 802.11 rates supported when mapped to a 2.4 GHz radio
b-only Uses rates that support only 11b clients
bg Uses rates that support both 11b and 11g clients
bgn Uses rates that support 11b, 11g and 11n clients
default Uses the default rates configured for a 2.4 GHz radio
g-only Uses rates that support operation in 11g only
gn Uses rates that support 11g and 11n clients
data-rates Specifies the 802.11 rates supported when mapped to a 5.0 GHz radio
a-only Uses rates that support operation in 11a only
an Uses rates that support 11a and 11n clients
default Uses default rates configured for a 5.0 GHz
data-rates [2.4GHz|5GHz] Specifies the 802.11 rates supported when mapped to a 2.4 GHz or 5.0 GHz radio
custom Configures a data rates list by specifying each rate individually. Use 'basic-' prefix before a rate to indicate it
is used as a basic rate (For example, 'data-rates custom basic-1 basic-2 5.5 11').
The data-rates for 2.4 GHz and 5.0 GHz channels are the same with a few exceptions.
The 2.4 GHz channel has a few extra data rates: 1, 11, 2, and 5.5.