Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 142)

Brocade Mobility RFS Controller CLI Reference Guide 125
53-1003098-01
3
mint ping MINT-ID {count <1-10000>|size <1-64000>|timeout <1-10>}
mint traceroute MINT-ID {destination-port <1-65535>|max-hops <1-255>|
source-port <1-65535>|timeout <1-255>}
Example
rfs7000-37FABE#mint ping 70.37.FA.BF count 20 size 128
MiNT ping 70.37.FA.BF with 128 bytes of data.
Response from 70.37.FA.BF: id=1 time=0.292 ms
Response from 70.37.FA.BF: id=2 time=0.206 ms
Response from 70.37.FA.BF: id=3 time=0.184 ms
Response from 70.37.FA.BF: id=4 time=0.160 ms
Response from 70.37.FA.BF: id=5 time=0.138 ms
Response from 70.37.FA.BF: id=6 time=0.161 ms
Response from 70.37.FA.BF: id=7 time=0.174 ms
Response from 70.37.FA.BF: id=8 time=0.207 ms
Response from 70.37.FA.BF: id=9 time=0.157 ms
Response from 70.37.FA.BF: id=10 time=0.153 ms
Response from 70.37.FA.BF: id=11 time=0.159 ms
Response from 70.37.FA.BF: id=12 time=0.173 ms
Response from 70.37.FA.BF: id=13 time=0.156 ms
Response from 70.37.FA.BF: id=14 time=0.209 ms
Response from 70.37.FA.BF: id=15 time=0.147 ms
Response from 70.37.FA.BF: id=16 time=0.203 ms
Response from 70.37.FA.BF: id=17 time=0.148 ms
Response from 70.37.FA.BF: id=18 time=0.169 ms
Response from 70.37.FA.BF: id=19 time=0.164 ms
Response from 70.37.FA.BF: id=20 time=0.177 ms
--- 70.37.FA.BF ping statistics ---
20 packets transmitted, 20 packets received, 0% packet loss
round-trip min/avg/max = 0.138/0.177/0.292 ms
rfs7000-37FABE#
ping <MINT-ID> Sends a MiNT echo message to a specified destination
•
<MINT-ID> – Specify the destination device’s MiNT ID.
count <1-10000> Optional. Sets the pings to the MiNT destination
•
<1-10000> – Specify a value from 1 - 60. The default is 3.
size <1-64000> Optional. Sets the MiNT payload size in bytes
•
<1-64000> – Specify a value from 1 - 640000 bytes. The default is 64 bytes.
timeout <1-10> Optional. Sets a response time in seconds
•
<1-10> – Specify a value from 1 - 10 seconds. The default is 1 second.
traceroute
<MINT-ID> Prints the route packets trace to a device
•
<MINT-ID> – Specify the destination device’s MiNT ID.
destination-port
<1-65535> Optional. Sets the Equal-cost Multi-path (ECMP) routing destination port
•
<1-65535> – Specify a value from 1 - 65535. The default port is 45.
max-hops <1-255> Optional. Sets the maximum number of hops a traceroute packet traverses in the forward direction
•
<1-255> – Specify a value from 1 - 255. The default is 30.
source-port
<1-65535> Optional.Sets the ECMP source port
•
<1-65535> – Specify a value from 1 - 65535. The default port is 45.
timeout <1-255> Optional. Sets the minimum response time period
•
<1-65535> – Specify a value from 1 - 255 seconds. The default is 30 seconds.