Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 971
960
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
13
domain-name Configure domain-name
ip-address Fixed IP address for host
netbios-name-server NetBIOS (WINS) name servers
netbios-node-type NetBIOS node type
next-server Next server in boot process
no Negate a command or set its defaults
option Raw DHCP options
respond-via-unicast Send DHCP offer and DHCP Ack as unicast messages
static-route Add static routes to be installed on dhcp clients
clrscr Clears the display screen
commit Commit all changes made in this session
do Run commands from Exec mode
end End current mode and change to EXEC mode
exit End current mode and down to previous mode
help Description of the interactive help system
revert Revert changes
service Service Commands
show Show running system information
write Write running configuration to memory or terminal
rfs4000-229D58(config-dhcp-policy-test-pool-testPool-binding-test)#
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#static-binding
hardware-address
11-22-33-44-55-66
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-11-22-33-44-55-66)#
?
DHCP static binding Mode commands:
bootfile Boot file name
client-name Client name
default-router Default routers
dns-server DNS Servers
domain-name Configure domain-name
ip-address Fixed IP address for host
netbios-name-server NetBIOS (WINS) name servers
netbios-node-type NetBIOS node type
next-server Next server in boot process
no Negate a command or set its defaults
option Raw DHCP options
respond-via-unicast Send DHCP offer and DHCP Ack as unicast messages
static-route Add static routes to be installed on dhcp clients
clrscr Clears the display screen
commit Commit all changes made in this session
do Run commands from Exec mode
end End current mode and change to EXEC mode
exit End current mode and down to previous mode
help Description of the interactive help system
revert Revert changes
service Service Commands
show Show running system information
write Write running configuration to memory or terminal
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1-binding-11-22-33-44-55-66)#