Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 455)

Brocade Mobility RFS Controller CLI Reference Guide 441
53-1003098-01
6
show captive-portal client {filter} {vlan [<VLAN-ID>|not <VLAN-ID>]}
show captive-portal client {filter} {wlan [<WLAN-NAME>|not <WLAN-NAME>]}
show captive-portal client {on <DEVICE-OR-DOMAIN-NAME>|statistics} {filter}
{captive-portal|ip|state|vlan|wlan}
Example
rfs4000-229D58#show captive-portal client on rfs4000-229D58
===========================================================================
RF-Domain: test
CLIENT IP CAPTIVE-PORTAL WLAN VLAN
STATE SESSION TIME
-----------------------------------------------------------------------------
-----------------------------------
44-6D-57-08-25-4A 10.10.10.183 test wlan-br7131-cp 1
Pending 0:00:00
-----------------------------------------------------------------------------
-----------------------------------
RF-Domain: test, sub-total of captive portal clients displayed = 1
===========================================================================
===========================================================================
RF-Domain: default
CLIENT IP CAPTIVE-PORTAL WLAN VLAN
STATE SESSION TIME
-----------------------------------------------------------------------------
-----------------------------------
captive-portal client Displays captive portal client information
filter Optional. Defines additional filters
vlan [<VLAN-ID>|
not <VLAN-ID>] Optional. Displays captive portal clients based on the VLAN ID passed
•
<VLAN-ID> – Specify the VLAN ID.
•
not <VLAN-ID> – Inverts match selection
captive-portal client Displays captive portal client information
filter Optional. Defines additional filters
wlan [<WLAN-NAME>|
not <WLAN-NAME>] Optional. Displays captive portal clients based on the WLAN name passed
•
<WLAN-NAME> – Specify the WLAN name.
•
not <WLAN-NAME> – Inverts match selection
captive-portal client Displays captive portal client information
on
<DEVICE-OR-DOMAIN-NAM
E> Optional. Displays captive portal clients on a specified device or RF Domain
•
<DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller, service platform, or RF
Domain.
statistics Optional. Displays captive portal client statistics. This feature enables monitoring of a captive portal client’s
data usage. When enabled, it provides a client’s data transmission (both upstream and downstream)
details, without considering the dot11 overhead for each packet.
filter The following keywords are common to the ‘on’ and ‘statistics’ parameters:
•
filter – Optional. Defines additional filters
•
captive-portal – Optional. Displays captive portal client information for a specified captive portal
•
ip – Optional. Displays captive portal client information based on IP address passed
•
state – Optional. Displays captive portal client information based on the their authentication state
•
vlan – Displays captive portal clients on a specified VLAN
•
wlan – Optional. Displays captive portal clients on a specified WLAN