Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 358)

342 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
kerberos server [primary|secondary|timeout]
kerberos server [primary|secondary] host <IP/HOSTNAME> {port <1-65535>}
kerberos server timeout <1-60>
Parameters
kerberos password [0 <LINE>|2 <LINE>|<LINE>]
kerberos realm <REALM>
kerberos server [primary|secondary] host <IP/HOSTNAME> {port <1-65535>}
kerberos server timeout <1-60>
Example
rfs7000-37FABE(config-wlan-test)#kerberos server timeout 12
rfs7000-37FABE(config-wlan-test)#kerberos server primary host 172.16.10.2 port
88
rfs7000-37FABE(config-wlan-test)#show context
wlan test
description TestWLAN
ssid test
bridging-mode local
kerberos Configures a WLAN’s Kerberos authentication parameters
The parameters are: password, realm, and server.
password Configures a Kerberos Key Distribution Center (KDC) server password. The password should not exceed
127 characters. The password options are:
•
0 <LINE> – Configures a clear text password
•
2 <LINE> – Configures an encrypted password
•
<LINE> – Specify the password.
kerberos Configures a WLAN’s Kerberos authentication parameters
The parameters are: password, realm, and server.
realm <REALM> Configures a Kerberos KDC server realm. The REALM should not exceed 127 characters.
kerberos Configures a WLAN’s Kerberos authentication parameters
The parameters are: password, realm, and server.
server [primary|secondary] Configures the primary and secondary KDC server parameters
•
primary – Configures the primary KDC server parameters
•
secondary – Configures the secondary KDC server parameters
host <IP/HOSTNAME> Sets the primary or secondary KDC server address
•
<IP/HOSTNAME> – Specify the IP address or name of the KDC server.
port <1-65535> Optional. Configures the UDP port used to connect to the KDC server
•
<1-65535> – Specify the port from 1 - 65535. The default is 88.
kerberos Configures a WLAN’s Kerberos authentication parameters
The parameters are: password, realm, and server.
timeout <1-60> Modifies the Kerberos KDC server‘s timeout parameters
•
<1-60> – Specifies the wait time for a response from the Kerberos KDC server before retrying. Specify
a value from 1 - 60 seconds.