Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 322)

306 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
Related Commands:
timezone
rf-domain-mode commands
Configures the RF Domain’s geographic time zone. Configuring the time zone is essential for RF
Domains deployed across different geographical locations.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
timezone <TIMEZONE>
Parameters
timezone <TIMEZONE>
Example
rfs7000-37FABE(config-rf-domain-default)#timezone America/Los_Angeles
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
contact Bob+919621212577
timezone America/Los_Angeles
stats update-interval 200
country-code in
sensor-server 2 ip 172.16.10.3
override-smartrf channel-list 2.4GHz 1,2,3
override-wlan test vlan-pool 2 limit 20
layout area Ecospace floor Floor5 map-location www.fiestfloor.com units
meters
rfs7000-37FABE(config-rf-domain-default)#
Related Commands:
tree-node
rf-domain-mode commands
Configures the hierarchial (tree-node) structure under which this RF Domain is located
Supported in the following platforms:
no Resets stats related settings
time <TIMEZONE> Specify the RF Domain’s time zone.
no Removes a RF Domain’s time zone