Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1125)

Brocade Mobility RFS Controller CLI Reference Guide 1117
53-1003098-01
19
no captive-portal authentication-state
no use [ip-access-list|mac-access-list] [in|out] <IP/MAC-ACCESS-LIST-NAME>
precedence <1-100>
Usage Guidelines:
The
no
command negates any command associated with it. Wherever required, use the same
parameters associated with the command getting negated.
Example
The following example shows the Role Policy ‘test’ User Role ‘testing’
configuration before the ‘no’ commands are executed:
rfs7000-37FABE(config-role-policy-test-user-role-testing)#show context
user-role testing precedence 10
authentication-type eq kerberos
encryption-type eq wep128
br-location contains office
mu-mac 11-22-33-44-55-66
group contains testgroup
captive-portal authentication-state pre-login
city exact SanJose
company exact MotorolaSolutions
country exact America
department exact TnV
emailid exact [email protected]
employeeid contains TnVMoto
rfs7000-37FABE(config-role-policy-test-user-role-testing)#
rfs7000-37FABE(config-role-policy-test-user-role-testing)#no
authentication-type
rfs7000-37FABE(config-role-policy-test-user-role-testing)#no encryption-type
rfs7000-37FABE(config-role-policy-test-user-role-testing)#no group
rfs7000-37FABE(config-role-policy-test-user-role-testing)#no mu-mac
rfs7000-37FABE(config-role-policy-test-user-role-testing)#no br-location
rfs7000-37FABE(config-role-policy-test-user-role-testing)#no employeeid
The following example shows the Role Policy ‘test’ User Role ‘testing’
configuration after the ‘no’ commands are executed:
rfs7000-37FABE(config-role-policy-test-user-role-testing)#show context
no title Removes the title filter
no user-defined Removes the user-defined filter (an attribute defined in the AD or OpenLDAP server)
no captive-portal Removes the captive portal based filter
authentication-state Removes the authentication state filter
no use Removes an IP or MAC access list from this user-defined role
[ip-access-list|
mac-access-list]
[in|out] Removes the specified IP or MAC access list from a user group
•
in – Removes the list from being applied to incoming packets
•
out – Removes the list from being applied to outgoing packets
<IP/MAC-ACCESS-LIST-NAME> Specifies the IP or MAC access list name
precedence <1-100> Specifies the access list precedence
•
<1-100> – Specify the precedence from 1 - 100.