Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 418
Brocade Mobility RFS Controller CLI Reference Guide
403
53-1003098-01
5
service load-balancing clear-client-capability [<MAC>|all] {on <DEVICE-NAME>}
service locator {<1-60>} {(on <DEVICE-NAME>)}
service radio <1-3> dfs simulate-radar [extension|primary]
service radius test [<IP>|<HOSTNAME>] <WORD> <USERNAME> <PASSWORD> {wlan
<WLAN-NAME>
ssid <SSID>} {(on <DEVICE-NAME>)}
load-balancing
Enables wireless load balancing by clearing client capability records
clear-client-capability
[<MAC>|all]
Clears a specified client or all client’s capability records
•
<MAC> – Clears capability records of a specified client. Specify the client’s MAC address in the
AA-BB-CC-DD-EE-FF format.
•
all – Clears the capability records of all clients
on <DEVICE-NAME>
Optional. Clears client capability records on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
locator
Enables LEDs
<1-60>
Sets LED flashing time from 1 - 60 seconds.
on <DEVICE-NAME>
The following keyword is recursive and common to the <1-60> parameter:
•
on <DEVICE-NAME> – Optional. Enables LEDs on a specified device
•
<DEVICE-NAME> – Specify name of the AP, wireless controller, or service platform.
radio <1-3>
Configures radio’s parameters
•
<1-3> – Specify the radio index from 1 - 3.
dfs
Enables Dynamic Frequency Selection (DFS)
simulate-radar
[extension|primary]
Simulates the presence of a radar on a channel. Select the channel type from the following options:
•
extension – Simulates a radar on the radio’s current extension channel
•
primary – Simulates a radar on the radio’s current primary channel
radius test
Tests RADIUS server’s account. This command sends an access-request packet to the RADIUS server. Use
this command to confirm time and data/bandwidth parameters for valid wireless clients.
•
test – Tests the RADIUS server’s account with user provided parameters
[<IP>|<HOSTNAME>]
Sets the RADIUS server’s IP address or hostname
•
<IP> – Specifies the RADIUS server’s IP address
•
<HOSTNAME> – Specifies the RADIUS server’s hostname
<WORD>
Specify the RADIUS server’s shared secret.
<USERNAME>
Specify username for authentication.
<PASSWORD>
Specify the password.
wlan <WLAN-NAME>
ssid <SSID>
Optional. Tests the RADIUS server on the local WLAN. Specify the local WLAN name.
•
ssid <SSID> – Specify the local RADIUS server’s SSID.
on <DEVICE-NAME>
Optional. This is a recursive parameter also applicable to the WLAN parameter. Performs tests on a specified
device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.