Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 108
Brocade Mobility RFS Controller CLI Reference Guide
91
53-1003098-01
3
clear vrrp [error-stats|stats] {on <DEVICE-NAME>}
Example
rfs7000-37FABE#clear crypto isakmp sa 111.222.333.01 on rfs7000-37FABE
rfs7000-37FABE#
rfs7000-37FABE#clear spanning-tree detected-protocols interface port-channel 1
on rfs7000-37FABE
rfs7000-37FABE#
rfs7000-37FABE#clear ip dhcp bindings 172.16.10.9 on rfs7000-37FABE
rfs7000-37FABE#
rfs7000-37FABE#clear cdp neighbors on rfs7000-37FABE
rfs7000-37FABE#
rfs4000-229D58#clear spanning-tree detected-protocols interface ge 1
rfs4000-229D58#
rfs4000-229D58#clear lldp neighbors
rfs4000-229D58#
rfs4000-229D58#show event-history
EVENT HISTORY REPORT
Generated on '2013-02-15 14:40:22 UTC' by 'admin'
2013-01-31 01:07:59 rfs4000-229D58 SYSTEM CLOCK_RESET System
clock reset, Time: 2013-02-15 14:25:35
2013-01-31 01:06:24 rfs4000-229D58 SYSTEM UI_USER_AUTH_SUCCESS UI user
'admin' from: '192.168.100.224' authentication successful
2013-01-31 00:58:28 rfs4000-229D58 SYSTEM CONFIG_COMMIT
Configuration commit by user 'admin' from '192.168.100.225'
interface
[<INTERFACE-NAME>|
ge <1-5>|me1|
port-channel <1-3>|
pppoe1|vlan <1-4094>|
wwan1]
Optional. Clears spanning tree entries on different interfaces
•
<INTERFACE-NAME> – Clears detected spanning tree entries on a specified interface. Specify the
interface name.
•
ge <1-5> – Clears detected spanning tree entries for the selected GigabitEthernet interface. Select
the GigabitEthernet interface index from 1 - 5.
•
me1 – Clears FastEthernet interface status
•
port-channel <1-3> – Clears detected spanning tree entries for the selected port channel interface.
Select the port channel index from 1 - 3.
•
pppoe1 – Clears detected spanning tree entries for PPPoE interface.
•
vlan <1-4094> – Clears detected spanning tree entries for the selected VLAN interface. Select a SVI
VLAN ID from 1- 4094.
•
wwan1 – Clears detected spanning tree entries for wireless WAN interface
on <DEVICE-NAME>
Optional. Clears spanning tree protocol entries on a selected device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
vrrp
Clears Virtual Router Redundancy Protocol (VRRP) statistics for a device
error-stats
{on <DEVICE-NAME>}
Clears global error statistics
•
on <DEVICE-NAME> – Optional. Clears VRRP global error statistics on a selected device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
stats
{on <DEVICE-NAME>}
Clears VRRP related statistics
•
on <DEVICE-NAME> – Optional. Clears VRRP related statistics on a selected device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.