Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 79)

Brocade Mobility RFS Controller CLI Reference Guide 61
53-1003098-01
2
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
ssh <IP/HOSTNAME> <USER-NAME>
Parameters
ssh <IP/HOSTNAME> <USER-NAME>
Example
rfs7000-37FABE>ssh 172.16.10.4 admin
The authenticity of host '172.16.10.4 (172.16.10.4)' can't be established.
RSA key fingerprint is 82:b7:27:86:de:08:e8:53:9f:d6:a3:88:aa:1f:e8:ff.
Are you sure you want to continue connecting (yes/no)?
telnet
User Exec Commands
Opens a Telnet session between two network devices
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
telnet <IP/HOSTNAME> {<TCP-PORT>}
Parameters
telnet <IP/HOSTNAME> {<TCP-PORT>}
Example
rfs4000-229D58>telnet 192.168.13.9
Entering character mode
Escape character is '^]'.
[<IP/HOSTNAME>] Specify the IP address or hostname of the remote system.
<USERNAME> Specify the name of the user requesting SSH connection with the remote system.
<IP/HOSTNAME> Configures the destination remote system’s IP address or hostname. The Telnet session is established
between the connecting system and the remote system.
•
<IP/HOSTNAME> – Specify the remote system’s IP address or hostname.
<TCP-PORT> Optional. Specify the Transmission Control Protocol (TCP) port number.