Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 944
Brocade Mobility RFS Controller CLI Reference Guide
933
53-1003098-01
13
The following table summarizes DHCP user class configuration commands.
multiple-user-class
Enables or disables multiple user class option for this DHCP user class policy. Enabling this option
allows this user class to transmit multiple option values to other DHCP servers also supporting
multiple user class options.
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
multiple-user-class
Parameters
None
Example
rfs7000-37FABE(config-dhcp-policy-test-class-class1)#multiple-user-class
rfs7000-37FABE(config-dhcp-policy-test-class-dhcpclass1)#show context
dhcp-class dhcpclass1
multiple-user-class
rfs7000-37FABE(config-dhcp-policy-test-class-dhcpclass1)#
Command
Description
Reference
Enables or disables multiple user class option for this DHCP user class policy
Negates a command or sets its default
Configures DHCP user class options for this DHCP user class policy
Clears the display screen
Commits (saves) changes made in the current session
Ends and exits the current mode and moves to the PRIV EXEC mode
Ends the current mode and moves to the previous mode
Displays the interactive help system
Reverts changes to their last saved configuration
Invokes service commands to troubleshoot or debug
(config-if)
instance
configurations
Displays running system information
Writes information to memory or terminal