Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 936)

924 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
12
no disable [deny|permit] <RULE-PARAMETERS>
Example
rfs7000-37FABE(config-mac-acl-test)#show context
mac access-list test
permit host 11-22-33-44-55-66 any log mark 8021p 3 rule-precedence 600
permit host 22-33-44-55-66-77 host 11-22-33-44-55-66 type ip log
rule-precedence 610
deny any host 33-44-55-66-77-88 log rule-precedence 700
rfs7000-37FABE(config-mac-acl-test)#no deny any host 33-44-55-66-77-88 log
rule-precedence 700
rfs7000-37FABE(config-mac-acl-test)#show context
mac access-list test
permit host 11-22-33-44-55-66 any log mark 8021p 3 rule-precedence 600
permit host 22-33-44-55-66-77 host 11-22-33-44-55-66 type ip log
rule-precedence 610
host
<SOURCE-HOST-MAC> Specify the source host’s exact MAC address.
<DEST-MAC>
<DEST-MAC-MASK> Specify the destination MAC address and mask
any Identifies all devices as the destination to deny/permit access
host <DEST-HOST-MAC> Specify the destination host’s exact MAC address.
dotp1p <0-7> Specify the 802.1p priority value from 0 -7.
type
[8021q|<1-65535>|
aarp|appletalk|arp|ip|ipv6|
ipx|mint|rarp|wisp] Specify the EtherType value.
vlan <1-4095> Specify the VLAN ID.
log Select log, if the rule has been configured to log records in case of a match.
mark
[8021p <0-7>|
dscp <0-63>] This is specific to the MAC ACL permit rule. Marks packets that match the ACL rule
•
8021p <0-7> – Modifies 802.1p VLAN user priority from 0 - 7
•
dscp <0-63> – Modifies DSCP TOS bits in the IP header from 0 - 63
rule-precedence
<1-5000> Specify the rule precedence. The rule with the specified rule precedence is removed from the MAC ACL.
rule-description
<LINE> Optional. Provide the description configured for the rule.
no disabled
[deny|permit] Removes a disabled deny or permit rule from the selected IP access list
<RULE-PARAMETERS> Enter the exact parameters used when configuring the rule.
rule-precedence
<1-5000>
rule-description <LINE>} Specify the precedence assigned to this disabled deny/permit rule.
•
rule-description – Optional. Specify the rule description.
The system removes the disabled rule from the selected ACL.