Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 61)

Brocade Mobility RFS Controller CLI Reference Guide 43
53-1003098-01
2
device-upgrade [br650|br6511|br1220|br71xx|br81xx|
|rfs4000|rfs6000|rfs7000] all {no-reboot|reboot-time <TIME>|
upgrade-time <TIME> {no-reboot|reboot-time <TIME>}} {(staggered-reboot)}
device-upgrade cancel-upgrade [<MAC/HOSTNAME>|all]
upgrade-time <TIME>
{no-reboot|
reboot-time <TIME>} Optional. Schedules an automatic device firmware upgrade on all devices
•
<TIME> – Specify the upgrade time in the MM/DD/YYYY-HH:MM or HH:MM format. The following
actions can be performed after a scheduled upgrade:
•
no-reboot – Optional. Disables automatic reboot after a successful upgrade
(the device must be manually restarted)
•
reboot-time <TIME> – Optional. Schedules an automatic reboot after a successful
upgrade. Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.
staggered-reboot This keyword is common to all of the above.
•
Optional. Enables staggered reboot (one at a time), without network impact
[br650|
br6511|br1220|
br71xx|
br81xx|rfs4000|
rfs6000|rfs7000] all Upgrades firmware on all devices of a specific type. Select the device type.
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point, Brocade
Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000
•
Service Platforms — Brocade Mobility RFS9510
•
all – Upgrades firmware on all
•
Brocade Mobility 650 Access Point all – Upgrades firmware on all Brocade Mobility 650 Access Points
•
Brocade Mobility 6511 Access Point all – Upgrades firmware on all Brocade Mobility 6511 Access
Points
•
Brocade Mobility 1220 Access Point all – Upgrades firmware on all Brocade Mobility 1220 Access
Points
•
Brocade Mobility 71XX Access Point all – Upgrades firmware on all Brocade Mobility 71XX Access
Points
•
Brocade Mobility 1240 Access Point all – Upgrades firmware on all Brocade Mobility 1240 Access
Points
•
Brocade Mobility RFS4000 all – Upgrades firmware on all Brocade Mobility RFS4000s
•
Brocade Mobility RFS6000 all – Upgrades firmware on all Brocade Mobility RFS6000s
•
Brocade Mobility RFS7000 all – Upgrades firmware on all Brocade Mobility RFS7000s
After selecting the device type, schedule an automatic upgrade and/or an automatic reboot.
no-reboot Optional. Disables automatic reboot after a successful upgrade (the device must be manually restarted)
reboot-time <TIME> Optional. Schedules an automatic reboot after a successful upgrade
•
<TIME> – Optional. Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.
upgrade-time <TIME>
{no-reboot|
reboot-time <TIME>} Optional. Schedules an automatic firmware upgrade on all devices of the specified type
•
<TIME> – Specify the upgrade time in the MM/DD/YYYY-HH:MM or HH:MM format. The following
actions can be performed after a scheduled upgrade:
•
no-reboot – Optional. Disables automatic reboot after a successful upgrade
(the device must be manually restarted)
•
reboot-time <TIME> – Optional. Schedules an automatic reboot after a successful
upgrade. Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.
staggered-reboot This keyword is common to all of the above.
•
Optional. Enables staggered reboot (one at a time), without network impact
cancel-upgrade
[<MAC/HOSTNAME>|
all] Cancels a scheduled firmware upgrade on a specified device or on all devices
•
<MAC/HOSTNAME> – Cancels a scheduled upgrade on the device identified by the
<MAC/HOSTNAME> keyword. Specify the device’s MAC address or hostname.
•
all – Cancels scheduled upgrade on all devices