Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 928)

916 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
12
NOTE
The log option is functional only for router ACL’s. The log option displays an informational logging
message about the packet matching the entry sent to the console.
Example
rfs7000-37FABE(config-ip-acl-test)#show context
ip access-list test
rfs7000-37FABE(config-ip-acl-test)#
rfs7000-37FABE(config-ip-acl-test)#permit ip 172.16.10.0/24 any log
rule-precedence 750
rfs7000-37FABE(config-ip-acl-test)#permit tcp 172.16.10.0/24 any log
rule-precedence 800
rfs7000-37FABE(config-ip-acl-test)#show context
ip access-list test
permit ip 172.16.10.0/24 any log rule-precedence 750
permit tcp 172.16.10.0/24 any log rule-precedence 800
rfs7000-37FABE(config-ip-acl-test)#
Related Commands:
mac-access-list
ACCESS-LIST
The following table summarizes MAC Access list configuration commands.
no Removes a specified IP permit access rule
alias Creates and configures aliases (network, VLAN, and service)
Command Description Reference
deny Creates a new deny access rule or modifies an existing rule. A deny access rule marks
packets for rejection. page 917
disable Disables a MAC deny or permit rule without removing it from the ACL page 919
insert Inserts a rule in an MAC ACL without overwriting or replacing an exciting rule having the
same precedence page 921
no Removes a deny and/or a permit access rule from a MAC ACL page 923
permit Creates a new permit access rule or modifies an existing rule. A deny access rule marks
packets for forwarding. page 925
clrscr Clears the display screen page 385
commit Commits (saves) changes made in the current session page 386
end Ends and exits the current mode and moves to the PRIV EXEC mode page 234
exit Ends the current mode and moves to the previous mode page 387
help Displays the interactive help system page 387
revert Reverts changes to their last saved configuration page 394
service Invokes service commands to troubleshoot or debug
(config-if)
instance
configurations
page 394