Employee-type – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 1117
Brocade Mobility RFS Controller CLI Reference Guide
1109
53-1003098-01
19
Example
rfs7000-37FABE(config-role-policy-test-user-role-testing)#emailid exact
testing@
motorolasolutions.com
rfs7000-37FABE(config-role-policy-test-user-role-testing)#show context
user-role testing precedence 10
authentication-type eq kerberos
br-location contains office
captive-portal authentication-state pre-login
city exact SanJose
company exact MotorolaSolutions
country exact America
department exact TnV
emailid exact [email protected]
rfs7000-37FABE(config-role-policy-test-user-role-testing)#
Related Commands:
employee-type
Configures a wireless client filter based on the employee type
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
employee-type [any|contains|exact|not-contains]
employee-type [any|exact <WORD>|contains <WORD>|not-contains <WORD>]
Parameters
employee-type [any|exact <WORD>|contains <WORD>|not-contains <WORD>]
Removes the e-mail ID configured with this user-defined role
employee-type
Specifies a wireless client filter based on how the ‘employee type’, returned by the RADIUS server,
matches the provided expression. Select one of the following options: any, contains, exact, or
not-contains.
any
No specific employee type associated with this user-defined role. This role can be applied to any wireless
client having any employee type (no strings to match). This is the default setting.
contains <WORD>
The role is applied only when the employee type, returned by the RADIUS server, contains the string
specified in the role.
•
<WORD> – Specify the string to match (this is case sensitive, and is compared against the employee
type returned by the RADIUS server). It should contain the provided expression.