Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 581)

568 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
7
no ip [arp|dhcp] trust
no ip igmp snooping {forward-unknown-multicast}
no ip igmp snooping {mrouter [interface <INTERFACE-LIST>|learn pim-dvmrp]}
no ip igmp snooping {querier {address|max-response-time|timer expiry|version}}
no tunnel unknown-unicast
no use [br-access-list|mac-access-list] tunnel out
no tunnel-over-level 1 2 Disables extended VLAN traffic over level 2 MiNT links
no
stateful-packet-inspection-12 Disables stateful packet inspection in the layer 2 firewall
no ip Negates or reverts VLAN bridge IP settings
arp trust Disables the trust of ARP responses on the VLAN
dhcp trust Disables the trust of DHCP responses on the VLAN
no ip Negates or reverts the VLAN bridge IP settings
igmp snooping Negates or reverts the IGMP snooping settings
forward-unknown-multicast Optional. Disables the forwarding of unknown multicast packets
no ip Negates or reverts the VLAN bridge IP settings
igmp snooping Negates or reverts the IGMP snooping settings
mrouter Optional. Resets or disables multicast router parameters
interface
<INTERFACE-LIST> Optional. Disables mrouter interfaces
•
<INTERFACE-LIST> – Specify a list of interface names separated by a space.
learn pim-dvmrp Optional. Disables multicast router learning protocols
•
pim-dvmrp – Disables PIM-DVMRP snooping of packets
no ip Negates or reverts the VLAN bridge IP settings
igmp snooping Negates the IGMP snooping components
querier Optional. Disables the IGMP querier
address Optional. Reverts to the default IGMP querier source IP address of 0.0.0.0
max-response-time Optional. Reverts to the default IGMP querier maximum response time
timer expiry Optional. Reverts to the default IGMP querier timeout
version <1-3> Optional. Reverts to the default IGMP version
no tunnel
unknown-unicast Disables tunneling of unicast messages, to unknown MAC destinations, on the selected VLAN bridge
no use Removes the VLAN bridge’s IP access list or MAC access list
ip-access-list tunnel out Removes the VLAN bridge’s IP access list
•
tunnel – Prevents the IP access list from being applied to all packets going into a tunnel
•
out – Prevents the IP access list from being applied to all outgoing packets
mac-access-list tunnel out Removes the VLAN bridge’s MAC access list
•
tunnel – Prevents the MAC access list from being applied to all packets going into a tunnel
•
out – Prevents the MAC access list from being applied to all outgoing packets