Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 770)

Brocade Mobility RFS Controller CLI Reference Guide 757
53-1003098-01
7
Syntax:
legacy-auto-downgrade
Parameters
None
Example
rfs7000-37FABE(config-profile-default-rfs7000)#legacy-auto-downgrade
Related Commands:
legacy-auto-update
Profile Config Commands
Auto updates an Brocade Mobility 650 Access Point or Brocade Mobility 71XX Access Point legacy
access point firmware
Supported in the following platforms:
• Access Points —Brocade Mobility 650 Access Point, Brocade Mobility 7131 Access Point
Syntax:
legacy-auto-update [br650|br71xx image <FILE>]
Parameters
legacy-auto-update [br650|br71xx image <FILE>]
Example
rfs7000-37FABE(config-profile-default-rfs7000)#legacy-auto-update br71xx
image flash:/ap47d.img
Related Commands:
lldp
Profile Config Commands
Configures LLDP settings
Supported in the following platforms:
no Prevents device firmware from auto downgrading when legacy devices are detected
legacy-auto-update Updates a legacy Brocade Mobility 650 Access Point or Brocade Mobility 7131 Access Point access point
firmware
br650 Auto updates legacy Brocade Mobility 650 Access Point firmware
br71xx
image <FILE> Auto updates legacy Brocade Mobility 7131 Access Point firmware
•
image – Sets the path to the firmware image
•
<FILE> – Specify the path and filename in the flash:/br.img format.
no Disables automatic legacy firmware upgrade