Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 349)

Brocade Mobility RFS Controller CLI Reference Guide 333
53-1003098-01
4
Example
rfs7000-37FABE(config-wlan-test)#data-rates 2.4GHz gn
rfs7000-37FABE(config-wlan-test)#show context
wlan test
ssid test
bridging-mode local
encryption-type none
authentication-type eap
accounting syslog host 172.16.10.4 port 2
data-rates 2.4GHz gn
client-load-balancing probe-req-intvl 5ghz 5
client-load-balancing band-discovery-intvl 2
captive-portal-enforcement fall-back
acl exceed-rate wireless-client-denied-traffic 20 disassociate
broadcast-dhcp validate-offer
rfs7000-37FABE(config-wlan-test)#
description
wlan-mode commands
Defines the WLAN description
Supported in the following platforms:
1,11,2,5.5 The following data rates are specific to the 2.4 GHz channel:
•
1 – 1-Mbps
•
11 – 11-Mbps
•
2 – 2-Mbps
•
5.5 – 5.5-Mbps
[12,18,24,36,48,54,6,9,
basic-1,basic-11,
basic-12,basic-18,
basic-2,
basic-36,basic-48,
basic-5.5,
basic-54,basic-6,
basic-9,basic-mcs-1s,
mcs-1s,mcs2s,mcs-3s] The following data rates are common to both the 2.4 GHz and 5.0 GHz channels:
•
12 – 12 Mbps
•
18 – 18-Mbps
•
24 – 24 Mbps
•
36 – 36-Mbps
•
48 – 48-Mbps
•
54 – 54-Mbps
•
6 – 6-Mbps
•
9 – 9-Mbps
•
basic-1 – basic 1-Mbps
•
basic-11 – basic 11-Mbps
•
basic-12 – basic 12-Mbps
•
basic-18 – basic 18-Mbps
•
basic-2 – basic 2-Mbps
•
basic-36 – basic 36-Mbps
•
basic-48 – basic 48-Mbps
•
basic-5.5 – basic 5.5-Mbps
•
basic-54 – basic 54-Mbps
•
basic-6 – basic 6-Mbps
•
basic-9 – basic 9-Mbps
•
basic-mcs-1s – Modulation and coding scheme data rates for 1 Spatial Stream
•
mcs-1s – Applicable to 1-spatial stream data rates
•
mcs-2s – Applicable to 2-spatial stream data rates
•
mcs-3s – Applicable to 3-spatial stream data rates