Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 168
Brocade Mobility RFS Controller CLI Reference Guide
151
53-1003098-01
3
virtual-machine set memory <512-8192> [adsp|team-cmt] {on <DEVICE-NAME>}
virtual-machine set Mobility-memory <12288-32739>
virtual-machine [start|stop] [adsp|team-cmt] {on <DEVICE-NAME>}
virtual-machine uninstall [adsp|team-cmt] {on <DEVICE-NAME>}
Example
The following examples show the VM installation process:
Installation media: USB
<DEVICE>#virtual-machine install <VM-NAME> type iso disk-size 8 install-media
usb1://vms/win7.iso autostart start memory 512 vcpus 3 vif-count 2 vnc enable
Installation media: pre-installed disk image
<DEVICE>#virtual-machine install <VM-NAME> type disk install-media
flash:/vms/win7_disk.img autostart start memory 512 vcpus 3 vif-count 2
vnc-enable on <DEVICE-NAME>
In the preceding example, the command is executed on the device identified by
the <DEVICE-NAME> keyword. In such a scenario, the disk-size is ignored if
specified. The VM has the install media as first boot device.
Installation media: VM archive
<DEVICE>#virtual-machine install type vm-archive install-media
flash:/vms/<VM-NAME> vcpus 3
In the preceding example, the default configuration attached with the VM
archive overrides any parameters specified.
virtual-machine set
memory
Modifies the ADSP or TEAM-CMT VM’s memory, in MB, based on the parameter passed. Specify a value
from 512 - 8192 MB.
•
on <DEVICE-NAME> – Optional. Executes the command on a specified device or devices
•
<DEVICE-NAME> – Specify the service platform name. In case of multiple devices,
list the device names separated by commas.
virtual-machine set
Mobility-memory
<12288-32739>
Specifies the Mobility memory size in MB.
This command is applicable only to the Brocade Mobility RFS9510 service platforms. Use the show >
virtual-machine-configuration command to view the configured memory allocation. Use the show >
virtual-machine-statistics to view the current allocated memory allocation.
•
<12288-32739> – Specify a value from 12288 - 32739 MB. The default is 18432 MB.
The new memory setting takes effect only after the next boot.
virtual-machine
[start|stop]
Starts/stops the ADSP or TEAM-CMT VM, based on the parameter passed
•
start – Starts the ADSP or TEAM-CMT VM. Use this command to boot a shut down VM (in a stop
state).
•
stop – Stops a running ADSP or TEAM-CMT VM. Use this command to shut down a running VM.
•
on <DEVICE-NAME> – Optional. Executes the start/stop command on a specified device or devices
•
<DEVICE-NAME> – Specify the service platform name. In case of multiple devices,
list the device names separated by commas.
virtual-machine uninstall
Uninstalls the ADSP or TEAM-CMT VM based on the parameter passed
•
on <DEVICE-NAME> – Optional. Executes the command on a specified device or devices
•
<DEVICE-NAME> – Specify the service platform name. In case of multiple devices,
list the device names separated by commas.