Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 985)

974 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
13
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
no [bootp|dhcp-class|dhcp-pool|option|ping]
no bootp ignore
no dhcp-class <DHCP-CLASS-NAME>
no dhcp-pool <DHCP-POOL-NAME>
no option <DHCP-OPTION>
no ping timeout
Parameters
no bootp ignore
no dhcp-class <DHCP-CLASS-NAME>
no dhcp-pool <DHCP-POOL-NAME>
no option <DHCP-OPTION>
no ping timeout
Example
The following example shows the DHCP policy ‘test’ settings before the ‘no’
commands are executed:
rfs7000-37FABE(config-dhcp-policy-test)#show context
dhcp-server-policy test
bootp ignore
dhcp-class dhcpclass1
no bootp Removes the BOOTP specific configuration
ignore Removes the DHCP server ignoring BOOTP requests
no dhcp-class
<DHCP-CLASS-NAME> Removes a specified DHCP class
•
<DHCP-CLASS-NAME> – Specifies the DHCP class name
no dhcp-pool
<DHCP-POOL-NAME> Removes a specified DHCP pool
•
<DHCP-POOL-NAME> – Specifies the DHCP pool name
no option Removes a DHCP option
<DHCP-OPTION> Sets the DHCP option
no ping timeout Resets the DHCP server ping timeout
•
timeout – Resets the timeout to its default