Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1149)

Brocade Mobility RFS Controller CLI Reference Guide 1141
53-1003098-01
20
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
smart-ocs-monitoring
{awareness-override|client-aware|extended-scan-frequency|
frequency|off-channel-duration|power-save-aware|sample-count|voice-aware}
smart-ocs-monitoring {awareness-override [schedule|threshold]}
smart-ocs-monitoring {awareness-override schedule <1-3> <START-TIME>
<END-TIME> <DAY>}
smart-ocs-monitoring {awareness-override threshold <10-10000>}
smart-ocs-monitoring {client-aware [2.4GHz|5GHz] <1-255>}
smart-ocs-monitoring {extended-scan-frequency [2.4GHz|5GHz] <0-50>}
smart-ocs-monitoring {frequency [2.4GHz|5GHz] <1-120>}
smart-ocs-monitoring {off-channel-duration [2.4GHz|5GHz] <20-150>}
smart-ocs-monitoring {power-save-aware [2.4GHz|5GHz]
[disable|dynamic|strict]}
smart-ocs-monitoring {sample-count [2.4GHz|5GHz] <1-15>}
smart-ocs-monitoring {voice-aware [2.4GHz|5GHz] [disable|dynamic|strict]}
Parameters
smart-ocs-monitoring {awareness-override schedule <1-3> <START-TIME>
<END-TIME>
<DAY>}
awareness-override Optional. Use this parameter to configure client awareness settings overrides
schedule <1-3>
<START-TIME>
<END-TIME>
{<DAY>} Configures a time and day schedule when awareness settings are overridden
•
<1-3> – Sets the awareness override schedule index. A maximum of three overrides can be
configured.
•
<START-TIME> – Sets the override start time in HH:MM format
•
<END-TIME> – Sets the override end time in HH:MM format
•
DAY – Optional. Set the day when the override is active. Use one of the following formats:
•
all – Override is active on all days
•
sun – Override is active only on Sundays
•
mon – Override is active only on Mondays
•
tue – Override is active only on Tuesdays
•
wed – Override is active only on Wednesdays
•
thu – Override is active only on Thursdays
•
fri – Override is active only on Fridays
•
sat – Override is active only on Saturdays