Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 310)

294 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
• Service Platforms — Brocade Mobility RFS9510
Syntax:
contact <WORD>
Parameters
contact <WORD>
Example
rfs7000-37FABE(config-rf-domain-default)#contact Bob+919621212577
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
contact Bob+919621212577
no country-code
channel-list 2.4GHz 1,2,3,4,5,6,7,8,9,10
rfs7000-37FABE(config-rf-domain-default)#
Related Commands:
control-vlan
rf-domain-mode commands
Configures the VLAN designated for traffic control in this RF Domain
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
control-vlan <1-4094>
Parameters
control-vlan <1-4094>
Example
rfs7000-37FABE(config-rf-domain-default)#control-vlan 1
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
contact Bob+919621212577
no country-code
contact <WORD> Specify contact details, such as name and number.
no Removes a network administrator’s contact details
<1-4094> Specify the VLAN ID from 1 - 4094. The default is 1.