Excluded-address – Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 955
944
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
13
Provides the domain name used by the controller with this pool
Domain names are not case sensitive and can contain alphabetic or numeric letters or a hyphen.
The FQDN consists of the host name and the domain name. For example,
computername.domain.com.
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
domain-name <DOMAIN-NAME>
Parameters
domain-name <DOMAIN-NAME>
Example
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#domain-name
documentation
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#show context
dhcp-pool testPool
address 192.168.13.4 class dhcpclass1
ddns server 192.168.13.9
ddns domainname WID
ddns multiple-user-class
domain-name documentation
bootfile test.txt
default-router 192.168.13.8 192.168.13.9
dns-server 192.168.13.19
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#
Related Commands:
excluded-address
Identifies a single IP address or a range of IP addresses, included in the DHCP address pool, that
cannot be assigned to clients by the DHCP server
Supported in the following platforms:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
<DOMAIN-NAME>
Defines the DHCP pool’s domain name
Removes a DHCP pool’s domain name