Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 417
402
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
5
service cli-tables-skin
[ansi|hashes|minimal|none|percent|stars|thick|thin|utf-8] {grid}
service cluster force [active|configured-state|standby]
service delete-offline-aps all
service delete-offline-aps offline-for days <0-999> {time <TIME>}
service enable [l2tpv3|radiusd]
service force-send-config {on <DEVICE-OR-DOMAIN-NAME>}
service force-update-vm-stats {on <DEVICE-NAME>}
cli-tables-skin
[ansi|hashes|minimal|
none|percent|stars|thick|
thin|uf-8]
Selects a formatting layout or skin for CLI tabular outputs
•
ansi – Uses ANSI characters for borders
•
hashes – Uses hashes (#) for borders
•
minimal – Uses one horizontal line between title and data rows
•
none – Displays space separated items with no decoration
•
percent – Uses the percent sign (%) for borders
•
stars – Uses asterisks (*) for borders
•
thick – Uses thick lines for borders
•
thin – Uses thin lines for borders
•
utf-8 – Uses UTF-8 characters for borders
grid
Optional. Uses a complete grid instead of just title lines
cluster
Enables cluster protocol management
force
Forces action commands on a cluster (active, configured-state, and standby)
active
Changes the cluster run status to active
configured-state
Restores a cluster to the configured state
standby
Changes the cluster run status to standby
delete-offline-aps all
Deletes all off-line access points
delete-offline-aps
Deletes off-line access points for a specified interval
day <0-999>
Deletes off-line access points for a specified number of days
•
<0-999> – Specify the number of off-line days from 0 - 999.
time <TIME>
Optional. Deletes off-line access points for a specified time
•
<TIME> – Specify the time in HH:MM:SS format.
enable l2tpv3
Enables L2TPv3 on low memory devices
enable radiusd
Enables RADIUS server loading on low memory devices
force-send-config
Resends configuration to device(s)
on
<DEVICE-OR-DOMAIN-NAME
>
Optional. Resends configuration to a specified device or all devices in a specified RF Domain
•
<DEVICE-OR-DOMAIN-NAME> – Specify the name of the AP, wireless controller,
service platform, or RF Domain.
force-update-vm-stats
Forcefully pushes VM statistics on to the NOC
on <DEVICE-NAME>
Optional. Executes the command on a specified device
•
<DEVICE-NAME> – Specify the name of the device.