Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 70
52
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
2
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
•
Service Platforms — Brocade Mobility RFS9510
Syntax:
l2tpv3 tunnel [<TUNNEL-NAME>|all]
l2tpv3 tunnel <TUNNEL-NAME> [down|session|up]
l2tpv3 tunnel <TUNNEL-NAME> [down|up] {on <DEVICE-NAME>}
l2tpv3 tunnel <TUNNEL-NAME> session <SESSION-NAME> [down|up] {on
<DEVICE-NAME>}
l2tpv3 tunnel all [down|up] {on <DEVICE-NAME>}
Parameters
l2tpv3 tunnel <TUNNEL-NAME> [down|up] {on <DEVICE-NAME>}
l2tpv3 tunnel <TUNNEL-NAME> session <SESSION-NAME> [down|up] {on
<DEVICE-NAME>}
l2tpv3 tunnel all [down|up] {on <DEVICE-NAME>}
Example
rfs7000-37FABE>l2tpv3 tunnel Tunnel1 session Tunnel1Session1 up on
rfs7000-37FABE
l2tpv3 tunnel
Establishes or brings down L2TPv3 tunnels
<TUNNEL-NAME>
[down|up]
Specifies the tunnel name to establish or bring down
•
down – Brings down the specified tunnel
•
up – Establishes the specified tunnel
on <DEVICE-NAME>
Optional. Establishes or brings down a tunnel on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
l2tpv3 tunnel
Establishes or brings down L2TPv3 tunnels
<TUNNEL-NAME>
[session
<SESSION-NAME>]
[down|up]
Establishes or brings down a specified session inside an L2TPv3 tunnel
•
<TUNNEL-NAME> – Specify the tunnel name.
•
session <SESSION-NAME> – Specify the session name.
•
down – Brings down the specified session
•
up – Establishes the specified session
on <DEVICE-NAME>
Optional. Establishes or brings down a tunnel session on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
l2tpv3 tunnel
Establishes or brings down L2TPv3 tunnels
all [down|up]
Establishes or brings down all L2TPv3 tunnels
•
down – Brings down all tunnels
•
up – Establishes all tunnels
on <DEVICE-NAME>
Optional. Establishes or brings down all tunnels on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.