Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 524
510
Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
6
show spanning-tree mst {instance <1-15>} {interface <INTERFACE-NAME>}
{(on <DEVICE-NAME>)}
Example
rfs7000-37FABE(config)#show spanning-tree mst configuration on rfs7000-37FABE
%%
% MSTP Configuration Information for bridge 1 :
%%------------------------------------------------------
% Format Id : 0
% Name : My Name
% Revision Level : 0
% Digest : 0xac36177f50283cd4b83821d8ab26de62
%%------------------------------------------------------
rfs7000-37FABE(config)#
rfs7000-37FABE(config)#show spanning-tree mst detail interface test on
rfs7000-37FABE
% Bridge up - Spanning Tree Disabled
% CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge Priority 32768
% Forward Delay 15 - Hello Time 2 - Max Age 20 - Max hops 20
% 1: CIST Root Id 800000157037fabf
% 1: CIST Reg Root Id 800000157037fabf
% 1: CIST Bridge Id 800000157037fabf
% portfast bpdu-filter disabled
% portfast bpdu-guard disabled
% portfast portfast errdisable timeout disabled
% portfast errdisable timeout interval 300 sec
% cisco interoperability not configured - Current cisco interoperability off
rfs7000-37FABE(config)#
interface [<INTERFACE>|
age <1-4>|me1|
port-channel <1-2>|
pppoe1|
van <1-4094>
wwan1]
Displays detailed MST configuration for a specified interface
•
<INTERFACE> – Displays detailed MST configuration for a specified interface. Specify the interface
name.
•
age <1-4> – Displays GigabitEthernet interface MST configuration
•
<1-4> – Select the GigabitEthernet interface index from 1 - 4.
•
pppoe1 – Displays PPP over Ethernet interface MST configuration
•
vlan – Displays VLAN interface MST configuration
•
<1-4094> – Select the SVI VLAN ID from 1 - 4094.
•
wwan1 – Displays Wireless WAN interface MST configuration
on <DEVICE-NAME>
The following keyword is common to all interfaces:
Optional. Displays detailed MST configuration on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
spanning-tree
Displays spanning tree information
mst
Displays MST configuration. Use additional filters to view specific details.
instance <1-15>
Optional. Displays information for a particular MST instance
•
<1-15> – Specify the instance ID from 1 - 15.
interface
<INTERFACE-NAME>
Optional. Displays MST configuration for a specific interface instance. The options are:
•
<INTERFACE-NAME> – Displays MST configuration for a specified interface. Specify the interface
name.
on <DEVICE-NAME>
Optional. Displays MST configuration on a specified device
•
<DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.